Fiber laser cutting
Fiber laser cutting stands out for its high speed, high cutting quality and efficiency. Increases productivity due to its ease of use and low operating costs.
Fiber Laser cutting can be used to cut sheet metal, to cut pipe or combined to cut sheet and pipe on the same machine.
The Fiber Laser cutting machine can be equipped with a single table or with an interchangeable table, which allows us to perform fast transactions in only 12-15 seconds and the cutting processes can be performed simultaneously, resulting in a significant increase in production.
Fiber laser cutting for sheet metal
STANDARD EQUIPMENT:
– Dimensions from 600×400 mm to 40,000 x 2,500 mm. Custom lengths can be manufactured upon request.
– Power ratings from 1 Kw to 40 Kw
– Heavy-duty machine frame
– Aviation aluminum gantry:
It is manufactured to aerospace standards and extrusion molded at 4300 tons of pressure. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries. Aviation aluminum has many advantages, such as high hardness, very light weight, corrosion resistance, anti-oxidation, low density, and greatly increases the processing speed.
– Laser Generator IPG, Raycus, Max Photonics, etc.
– Precitec, Raytools, etc. cutting head.
– Hardened linear guides
– Ball screw drive
– DELTA Servomotors
– S&A/HANLI/TONGFEI cooling system
– Automatic lubrication
Fiber laser cutting for tubes
STANDARD EQUIPMENT:
– Dimensions from 6,000 mm to 12,000 mm. Custom lengths can be manufactured upon request.
– Power from 500 w up to 25 Kw.
– Round tube diameter: from Ø20 mm to Ø220 mm
– Laser Generator IPG, Raycus, Max Photonics, etc.
– Precitec, Raytools, etc. cutting head.
– Hardened linear guides
– Ball screw drive
– Servo motors on shafts
– S&A/HANLI/TONGFEI cooling system
Fiber laser cutting for sheet metal and tubes
STANDARD EQUIPMENT:
– Dimensions from 600×400 mm to 40,000 x 2,500 mm. Custom lengths can be manufactured upon request.
– Power ratings from 1 Kw to 40 Kw
– Heavy-duty machine frame
– Aviation aluminum gantry:
It is manufactured to aerospace standards and extrusion molded at 4300 tons of pressure. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries. Aviation aluminum has many advantages, such as high hardness, very light weight, corrosion resistance, anti-oxidation, low density, and greatly increases the processing speed.
– Dimensions from 3,000 mm to 12,000 mm. Custom lengths can be manufactured upon request.
– Powers from 1.kw up to 40 Kw.
– Round tube diameter: from Ø20 mm to Ø220 mm
– Laser Generator IPG, Raycus, Max Photonics, etc.
– Precitec, Raytools, etc. cutting head.
– Hardened linear guides
– Ball screw drive
– Servo motors on shafts
– S&A/HANLI/TONGFEI cooling system
